How to update the (new)Software Version by Floppy Disk
RES117.SYS
Insert the floppy disk containing the Software program named RES117.SYS into the FDD.
Then turn the instrument on while keeping the “ Select” (Style /Midi Set) + “Gm/Gs mode” + “Bass Inversion” buttons pressed.
The display shows:
FLASH UPDATE
STYLE 1 to EXIT  STYLE
2 to CONTINUE
|
|
By pressing the “Style 1” button you will exit the Flash loading mode and the instrument will get back to the old program.
By pressing the “Style 2” button you’ll start loading the Flash EPROM.
The display shows:
FLASH UPDATE
Initialising . . . .
ATTENTION !! Do not turn instrument off
|
|
After a few seconds, the display shows:
FLASH UPDATE
Program loading ……. COMPLETED
Program checking ……. COMPLETED
Flash updating ……. Block XX…(COMPLETED)
<< TURN INSTRUMENT ON AGAIN>>
|
|
If the loading operation of the Flash EPROM has been completed, you’ll have confirmation if the message “ COMPLETED” is displayed. After a few seconds, you have to turn the instrument off and then on again.
Now you have to make sure that the version 1.02 has been installed correctly by carrying out the following operation: turn the instrument on while keeping the “ WRITE” + “ SHIFT” + RESET/TAP TEMPO buttons pressed.
Now the display must show:
G-1000 Arranger
Keyboard
Ver. 1.02
(Date Version): Thu Jun 11 17:08:20 1998
CPU Bios Version:
Ver. 1.03
|
|
To exit from this screen display, turn the instrument off. |
