*For your personal data safety read with attention -
Before any update operation, please make a personal data backup.
If you have some trouble you can come back restoring your personal data previously backup.

*Attention! To perform update operation you need at least 7000 Kbytes free.
Please check your free memory space.
Please don’t perform any updating operation if you haven't enough free memory.
If you have not enough space please read the  "E-80 BACKUP instructions"

How to check your free memory space
1. Press [MENU] > [UTILITY] > [INFO]
2. The E-80 shows the “FREE SPACE INTERNAL MEMORY”
3. Please check if the memory free is more than 7000 Kbytes

E-80 BACKUP instructions
(Windows)

1. Connect the E-80’s USB port to your computer.
2. Save your personal user program set pressing [DISK&MEDIA] > [SAVE] > [USER PROGRAM SET]
3. Press [MENU] > [USB DATA STORAGE] > [INTERNAL MEMORY]
As soon as the connection has been established, the E-80’s display shows “CONNECTED” (USB DATA STORAGE page).
4. On your computer, open the “My Computer” window.
There should be a “Removable Disk” entry that refers to the E-80’s internal memory (E80_SSD).
5. Create a new folder “My Backup” on your PC. This folder will contain your personal backup.
6. Drag & drop all E-80 folders into “My Backup” folder.
7. When all files have been copied, terminate the USB connection using the tray icon at the right of your computer’s tool bar.
The tray icon related to the USB connection looks like a green arrow on top of an electronic device.
Leave the mouse pointer on this icon and wait for the “safely remove hardware” message to appear.
8. Using the left mouse button, double-click this icon to open a window that lists all hardware devices that are currently connected to that USB port.
Select “USB mass storage device” and check at the bottom whether the device description refers to your E-80 (“Roland Arranger USB device”).
Click “Disconnect”, and in the next window “OK”, then wait for the message that informs you that you can disconnect the hardware.
Click “OK” to close this window.
9. On the E-80, press the [EXIT] button or [DISCONNECT] field.
10. Disconnect the E-80’s USB port to your computer.

E-80 BACKUP instructions
(Macintosh)

1. Connect the E-80’s USB port to your computer.
2. Save your personal user program set pressing [DISK&MEDIA] > [SAVE] > [USER PROGRAM SET]
3. Press [MENU] > [USB DATA STORAGE] > [INTERNAL MEMORY].
As soon as the connection has been established, the E-80’s display shows: “CONNECTED” (USB DATA STORAGE page).
4. Create a new folder “My Backup” on your Mac. This folder will contain your personal backup.
5. Double-click on “E80_SSD” icon on your computer’s desktop and  select the entire E-80 contents.
6. Drag & drop all E-80 folders into “My Backup” folder.
7. Drag the “E80_SSD” icon to the recycle bin (or use the equivalent shortcut).
Wait until the icon has disappeared from you desktop.
8. On the E-80, press the [EXIT] button or [DISCONNECT] field.
9. Disconnect the E-80’s USB port to your computer.

RESTORE PERSONAL BACKUP instructions
(Windows)

Attention! The following procedure will delete your E-80 personal data by replacing it with the personal data previously backed-up.

Attention! Before starting with the following procedure please make sure that your PC USB connection works properly with E-80.

1. Before starting the update procedure, make sure that the “Internal Protection” switch (on the E-80 rear panel) is set to  unlocked position
2. Power on the E-80 by pressing and holding “REC” and “TOP” switches on the RECORDER section
3. A format menu message appears. Press the "USER PROGRAM1” switch to format. The E-80 inizialise the internal memory
4. Power off and power on again
5. Connect the E-80’s USB port to your computer
6. Press [MENU] > [USB DATA STORAGE] > [INTERNAL MEMORY]
As soon as the connection has been established, the E-80’s display shows “CONNECTED” (USB DATA STORAGE page)
7. On your computer, open the “My Computer” window
There should be a “Removable Disk” entry that refers to the E-80’s internal memory (E80_SSD)
8. Drag & drop all folders in “My Backup” into “Removable Disk” icon (E80_SSD)
9. When all files have been copied, terminate the USB connection using the tray icon at the right of your computer’s tool bar
The tray icon related to the USB connection looks like a green arrow on top of an electronic device.
Leave the mouse pointer on this icon and wait for the “safely remove hardware” message to appear.
10. Using the left mouse button, double-click this icon to open a window that lists all hardware devices that are currently connected to that USB port.
Select “USB mass storage device” and check at the bottom whether the device description refers to your E-80 (“Roland Arranger USB device”)
Click “Disconnect”, and in the next window “OK”, then wait for the message that informs you that you can disconnect the hardware
Click “OK” to close this window
11. On the E-80, press the [EXIT] button or [DISCONNECT] field
12. Disconnect the E-80’s USB port to your computer
13. Press [MENU] > [UTILITY] > [FACTORY RESET].
14. Press “EXECUTE” button.
15. Load your personal user program set previously saved pressing [DISK&MEDIA] > [LOAD] > [USER PROGRAM SET]

RESTORE PERSONAL BACKUP instructions
(Macintosh)

Attention! The following procedure will delete your E-80 personal data replacing with your previous backed-up personal data.

Attention! Before starting with the following procedure please make sure that your PC USB connection work properly with E-80.

1. Before starting the update procedure, make sure that the “Internal Protection” switch (on the E-80 rear panel) is set to  unlocked position.
2. Power on the E-80 by pressing and holding “REC” and “TOP” switches on the RECORDER section.
3. A format menu message appears. Press the « USER PROGRAM1” switch to format.
The E-80 initialise the internal memory.
4. Power off and power on again.
5. Connect the E-80’s USB port to your computer.
6. Press [MENU] > [USB DATA STORAGE] > [INTERNAL MEMORY].
As soon as the connection has been established, the E-80’s display shows “CONNECTED” (USB DATA STORAGE page).
7. Select the entire contents of the “My Backup” folder.
8. Drag & Drop the selected files and folders to the “E80_SSD” icon on your computer’s desktop to copy them to the E-80.
If a message appears asking you to overwrite the data, confirm and replace the contents of the E-80’s internal disk.
9. Drag the “E80_SSD” icon to the recycle bin (or use the equivalent shortcut).
Wait until the icon has disappeared from your desktop.
10. On the E-80, press the [EXIT] button or the [DISCONNECT] field.
11. Disconnect the E-80’s USB port to your computer.
12. Press [MENU] > [UTILITY] > [FACTORY RESET].
13. Press “EXECUTE” button.
14. Load your personal user program set previously saved pressing [DISK&MEDIA] > [LOAD] > [USER PROGRAM SET].